5 Best Anode Rod for Softened Water

The anode rod for softened water uses a steel wire with aluminum or magnesium. Also, there can be zinc over it to extend its life.

These rods intend to protect the water heaters and the metal linings inside the water tanks. It is because of the anode rod that the water heater keeps safe from corrosion.

Tap water contains minerals that eat the heater elements over time. That is why the magnesium anode rods are best for softened water. However, if your home gets hard water, the aluminum anode rods perform better.

It is the anode rod that prevents corrosion by attracting corrosive minerals and eliminating them.

In this process, it is reducing itself. It is the reason why these cannot last forever. A time will come when you will need to replace it with a new one.

Plus, it will prolong the life of your water heater. Therefore, buying the best anode rod for softened water is vital. We will guide you on buying tips after reviewing the top five anode rods.

So, you can check the pros and cons of these before you buy any.

 

Best Anode Rod for Softened Water Reviews

1. Corro-Protec CP-R Water Heater Powered Titanium Anode Rod

The Corro-Protec CP-R titanium anode rod is a trending solution for eliminating rotten egg smell from water heaters. It is the hydrogen sulfide that causes a bad smell. So, this anode rod uses advanced technology and comes with a 20-year warranty. You can use it to replace up to 89-gallon hex head anode rod of the water heater. Also, it prevents all types of damages from soft or hard water. It is easy to install, and you can do it yourself with comfort. This anode rod eliminates minerals that can accumulate and damage the water tank.

 

There will be no odors or corrosions inside the water tanks of the water heaters when you use this anode rod. It helps to reduce energy costs because of removing all tank-damaging elements from soft or hard water. It provides 24-hour protection against the odors that a water heater can cause. There is an electric current inside the anode rod that eliminates all corrosive substances. Therefore, it increases the life expectancy of the water heater and its tank. Plus, it removes limescale that can cause pipes and other materials to decay.

 

You can use it for many years because of its durable titanium materials. The Teflon tape comes with the pack along with other necessary components. Replacing the original anode rod of the water heater with it is easy. You will require a power plug to connect the power adapter. So, when you join its current rectifier, it starts to operate. Always disconnect the water supply and power source for the water heater before you replace it.

2. Ozek RV Water Heater Magnesium Anode Rod with PTFE Tape – Compatible with Suburban and Mor-Flo Water Heaters-9.25″ Length ¾” NPT Threads

The Ozek RV Water Heater Magnesium Anode Rod is best for water heaters inside the RVs. Also, you can use it at home to increase the life of a water heater. This anode rod has magnesium materials to use with softened water. Removing corrosive elements is vital to keep the water heater away from damages. That is why the Ozek RV anode rod guarantees to endure for a long time. It is compatible with suburban and other water tanks because it uses NPT threads. Also, it uses a 9.25-inch long rod that functions better.

 

The kit that comes with this anode rod has two anode rods and a PTFE tape. You can use it for up to 12-gallon tanks. It is safe for human skin. So, you and your family can use it safely for hot water from a heater. It is the perfect solution for increasing the life of the tank. These magnesium anode rods perform better than the aluminum ones.

 

One of the advantages of buying this anode rod is that its pack comes with two rods. So, you can replace the rod when its life ends with the extra one. The 1-1/16 inch socket makes it compatible with all suburban water heater tanks. There are also the 25-inch 3/4 NPT Threads. You can install it with comfort because the instruction manual comes with the pack.

3. About Fluid Aluminum Zinc Replacement Anode Rods for Water Heaters (Aluminum ZINC Complete KIT)

This anode rod comes with a complete kit for you to install with comfort. It uses aluminum-zinc materials to replace the anode rods of a water heater tank. Thus, you can increase the life of your water heater. Also, these anode rods help you lower your repair costs for the water heater. The best thing about this anode rod is that it is universally compatible with all water heater tanks. There is a 1/16-inch wall socket that you can fit anywhere. Therefore, you can upgrade the anode rod with comfort. The pack comes with a roll of Teflon tape.

 

This anode rod can last up to two or more years. The reason for this is that it uses aluminum alloy and zinc. It removes the odors that the water heater produces. You can install it with comfort because there is a step-by-step professional instruction manual. The length of this rod is 44-inch comes in segments of 12-inch sizes. So, you can cut it with a hacksaw if there is a need. Also, there is enough Teflon tape that you can use to prevent leaks. However, you will need to check it after two years or replace it.

4. Osring 44 Inch Flexible Water Heater Anode Rod 3/4 Inch NPT Thread, Magnesium Anode Bar with Hex Head for Water Heater

To prolong the life of a water heater tank, you can use this anode rod. It has a length of 44-inch and is flexible. That is why it is compatible with all water heater tanks. All the materials are of high-quality magnesium alloy. It is why this anode rod is best for use with softened water at homes or offices. The anode rod significantly increases the life of a water heater and its tank. This magnesium alloy anode rod will eliminate all corrosive and rust-causing elements from soft water. It is always better to use magnesium rods for soft water and not aluminum ones.

 

It comes in segments of four parts that you can cut with a hacksaw as per your demand. Also, the 44-inch anode rod is flexible and easy to work with when installing. There is an aluminum-zinc hex plug with a diameter of 4/5-inch and the 3/4-inch NPT Threads. Hence, it is compatible with many heaters like Kenmore, Reliance, and others. It will last up to two years because of its quality materials. This rod also performs better to remove rotten eggs smell from the hot water. So, you can buy it with confidence. However, always check or replace it every two years of usage.

5. E-SDS Residential Magnesium Flexible Anode Rod for Water Heater

One of the best solutions to protect the water tanks is using the E-SDS magnesium anode rod. There will be no corrosion or rust inside the water tanks of the water heaters. This anode rod will let you save on repair costs or other expenses for the water tank damages. Also, it has a flexible design for use in tight areas. Thus, you can install it with ease using the NPT threads and a hex plug that comes with the package. There are a total of four segments for the 44-inch rod. You can use the hacksaw to cut it in length that you require.

 

The manufacturer provides a 90-day money-back guarantee for this anode rod. It can last up to two years inside the tank. All of the magnesium materials are of high quality. Thus, it is a durable anode rod for the water tanks. It removes odors and eliminates all corrosive elements from the softened water.

Buying Guide For Anode Rod For Softened water

When you are planning to buy an anode rod, there are a few things that you must know. That is why we have a guide that will provide some tips. These tips will let you decide and buy the one that is best for you. Also, you can use these to shop online.

Materials

The material of the anode rod is vital. You will need to check the quality of the water supply that you get at home. If the water is hard, you better use aluminum or titanium anode rods. However, for softened water, use the magnesium ones.

Price

These anode rods are cheap and easy to buy online or at shops. The ones that use titanium material can be a bit pricey. It is because titanium lasts for many years. The most affordable is the magnesium anode rod. Also, it is best for softened water.

Size

The magnesium anode rods come in a length of 44 inches and have three or four segments. So, you can cut the flexible design anode rods. The aluminum and titanium anode rods have shorter lengths.

Installation

All of the anode rods are easy to install using the instruction manual. However, if you feel uncomfortable, you can hire a plumber to do so. The pack contains all the tools and accessories that you require to replace the anode rods. Also, these come with Teflon or other tapes.

 

Frequently Asked Questions (FAQs)

What is the most trusted brand for anode rods?

Many brands offer quality anode rods. You can buy the one that comes with a warranty.

Is there a warranty for anode rods?

Yes, there is a warranty for these. The titanium anode rod comes with a 10 to 20-year warranty. However, the aluminum and magnesium anode rods come with a check or warranty for some days only.

Can you use heater anode rods for any heater tank?

Yes, there are anode rods that are compatible with all types of heater tanks. However, you must always check with the manufacturer when you buy one. Take all the necessary measurements and make sure the fittings and the sizes are compatible.

Where can I buy a heater anode rod?

You can buy it from Amazon or other online stores.

 

Conclusion

The magnesium anode rod that is of high quality is the best anode rod for softened water. It protects that water heater tank from corrosive substances and rust. There are magnesium anode rods that come in a 44-inch size and flexible design. You can cut these with comfort using a hacksaw. However, these only last up to two years. So, you will have to check sooner for replacing it depending on how much water you use. The titanium anode rods are a bit pricey, but they can last for many years.